Canon PIXMA MX492 Manual Scanner Driver and Software Download

Posted on
Canon MX492 Software Manual
Canon PIXMA MX492

Canon PIXMA MX492 Wireless Setup, Instruction Manual, IJ Setup Driver and Scanner Software Printer Driver Download For Windows, Mac – The PIXMA MX492 Wireless Inkjet Office All-In-One brings exceptional top-notch, price as well as also simplicity of use to your service. Built-in Wi-Fi enables you print along with scan from any type of type of kind of area in your house while you produce papers as well as pictures with a 9600 x 2400 maximum color dpi2, 1picoliter as well as a 5 specific ink container system. We’ll be starting today with the Canon Pixma MX492 Wireless Office All-in-one, the front runner of the new regular targeted at the small office, office (SOHO) market. The Pixma MX492 includes print increase to 12.5 ipm in black and also in addition 9.3 ipm in color, a 3-inch LCD with the new Double Feature Panel, automatic duplexing along with additionally built-in cordless network connection. Canon does make use of a draft print setup by having a look at the rapid concern box in the print structures menu.

The Canon Pixma MX492 is an all-in-one inkjet printer with scan as well as copy functions, an automatic file feeder and also built-in faxing. It works with Windows as well as macOS. The multi-color ink cartridge should be changed when a single color goes out. It can approve paper up to 83 # basis weight, much heavier than what’s common. There’s an automatic record feeder to allow you copy or scan a stack of web pages in one procedure. The printer has a medium-size 2.1-inch display screen. You can connect directly to a PC with a USB wire, or to your network router wirelessly with WiFi. This design has built-in faxing, can store inbound faxes if the paper goes out, and can send faxes from an affixed COMPUTER. When arrangement for use, the Canon Pixma MX492 needs a room that determines 8.9 inches high by 16.9 inches vast by 20.7 inches deep.

The Pixma MX492 utilizes automatic duplexing, however do not expect a quick turn-around. It took in between 15 as well as 16 minutes to print our 40 internet sites message file; regarding 4 times the minute it required to print the very same paper in conventional print arrangement (less than 4 mins). The Canon Pixma MX882 includes 5 traditional ability ink cartridges: one pigment-based Canon PGI-225 black ink container and also 4 Canon CLI-226 dye-based shade cartridges cyan, yellow, magenta along with black. Considering that this writing, there weren’t high capability cartridges provided on the Canon official site.

Os CompatibleSpecifications

Canon PIXMA MX492 OS Compatibility

  • Windows:19 Windows® 10, Windows® 8, Windows 8.1,
  • Windows 7, Windows 7 SP1, Windows Vista® SP1,
  • Vista SP2, Windows XP SP3 32-bit
  • Mac:20 Mac OS® X v10.7.5 – 10.10

Canon PIXMA MX492 Specifications

Printer
Printing TechnologyFull-photolithography Inkjet Nozzle Engineering (FINE)
Maximum ResolutionColor: 4800 x 1200 dpi
Black: 600 x 600 dpi
Print SpeedBlack: 8.8 ipm
Color: 4.4 ipm
Borderless 4 x 6″ (10.2 x 15.2 cm) photo in 70 seconds
Minimum Ink Droplet Size2 pl
Ink TypeDye: Cyan, magenta, yellow
Pigment: Black
Ink Cartridge Configuration2 individual cartridges
Compatible Ink CartridgesPG-245 Black Ink Cartridge
PG-245 XL XL Black Ink Cartridge
CL-246 Color Ink Cartridge
CL-246 XL XL Color Ink Cartridge
Number of NozzlesColor: 640
Pigment Black: 1,152
Total: 1,792
Print FeaturesApple AirPrint, borderless printing, document printing, Full HD Movie Print, special filters, Google Cloud Print, My Image Garden, photo printing, PIXMA Printing Solutions, quiet mode, wireless printing, access point mode, dual color gamut processing technology
Scanner
Image SensorContact Image Sensor (CIS)
Optical ResolutionFlatbed: 2400 x 1200 dpi
ADF: 600 x 600 dpi
Interpolated Resolution19,200 x 19,200 dpi
Color Depth48-bit internal / 24-bit external
Maximum Scan SizeFlatbed: 8.5 x 11.7″ (21.6 x 29.7 cm)
ADF: 8.5 x 14.0″ (21.6 x 35.6 cm)
Scanner FeaturesAuto scan mode, network scan, push scan, PDF password security, send to cloud
Copier
Copy SpeedColor: 3.6 ipm
Reduction / Enlargement25-400%
Copy FeaturesADF, auto exposure, borderless, fit-to-page, preset copy ratios, frame erase copy, zoom
Fax
Modem Speed33.6 Kbps Super G3 color fax
Transmission SpeedBlack: 3 seconds per page
Colo: 1 minute per page
Memory50 pages
Group Dials19 locations
Fax FeaturesAnswering machine connectivity, caller rejection, check RX fax info, fax reception reject, fax number re-entry, memory transmission, redial, remote reception
Media Handling
Paper HandlingAutomatic document feeder
Input tray
Paper Sizes4 x 6″ (10.2 x 15.2 cm), 5 x 7″ (12.7 x 17.8 cm), 8 x 10″ (20.3 x 25.4 cm), letter, legal, U.S. #10 envelopes
Borderless Printing WidthUp to 8.5″ (21.6 cm)
Paper TypesPlain Paper, High Resolution Paper, Photo Paper Pro Platinum, Photo Paper Plus Glossy II, Photo Paper Glossy, Photo Paper Plus Semi-Gloss, Photo Paper Pro Luster, Matte Photo Paper, U.S. #10 Envelope
Paper CapacityInput Tray: 100 sheets
ADF: 20 sheets
Connectivity
Computer InterfaceWi-Fi (802.11b/g/n)
USB 2.0
Wireless Printing FeaturesPIXMA Printing Solutions, Apple AirPrint, Google Cloud Print, Mopria-certified
Direct Print CapableYes
Compatible Operating SystemsWindows 8, 8.1, 7, 7 SP1, Vista SP1, Vista SP2, XP SP3 (32-bit)
Mac OS X 10.7.5-10.10
iOS, Android, Windows RT
Physical
Status DisplayDot-matrix LCD
Power Requirements100-240 VAC, 50/60 Hz
Dimensions17.2 x 11.7 x 7.5″ (43.7 x 29.7 x 19.1 cm)
Weight17.2 lb (7.8 kg)
Packaging Info
Package Weight16.5 lb
Box Dimensions (LxWxH)21.5 x 14.5 x 10.0″
Canon PIXMA MX492 Setup For Windows

How to Setup a Canon Pixma Printer on Windows-based Devices

Before being able to use a Canon Pixma printer on a PC or a laptop, you need to learn a few steps on how to connect the unit to the device. If you do not connect the printer to the computer first, the two will not have any means of communicating with each other. Setup usually begins automatically the moment you plug your printer’s cable to the computer you use. But there will be a point where you might have skipped the setup wizard or where the wizard does not appear for some reasons.

Here are the steps to setup the printer manually.

  1. Remove the printer from the packaging first and turn it on right away. Place the ink cartridges inside the printer only when you are being asked to by a notification prompted on the screen display. These ink cartridges are normally included within the packaging. If your computer has already been installed with Windows XP, you may proceed right away to step 7.
  2. The printer screen asks you to print and scan alignment sheet. Follow this instruction and press OK once done.
  3. Place the setup CD in your computer’s CD-ROM. Do this even though the printer is trying to connect to your computer wirelessly. Drivers for creating wireless networks are included on this CD.
  4. The CD will prompt instructions for you to follow. Choose the Wi-Fi network signal that you use with the printer. Choose the network signal on both your printer screen display and your computer. When the printer connects to the network, the printer’s Wi-Fi light will go off.
  5. Print a test page from the computer once setup process is done and the printer asks you to do so.
  6. Go to “Printers” on your computer. Make sure that the printer you just connected to it is set as default printer. This will help all other software refers to the printer as their primary one. Find a checkmark next to the printer’s name.
  7. Go to printer setup. Locate a printer connected through a network. This process could go for some minutes. Enable the “printer and file sharing” on the computer to view a printer that is connected through a USB on a network.
  8. When the computer finds your printer, choose “select this printer”. Make sure that the printer is set as a default printer. Give it a try and print a page.

Canon Pixma MX492 Printer Setup on Mac

How to Setup a Canon PIXMA MX492 Setup For Mac

There are some cases to learn about how to deal with when it comes to setting up a Canon Pixma printer on a Mac.

  1. The printer has a built-in display on it

If your printer comes with a built-in digital, touchscreen display, you can use the feature to directly enter Wi-Fi name and password. You should refer to the printer’s guide to knowing how this works.

  1. The printer uses a WPS (Wi-Fi Protected Setup)

Refer to the router’s guide to know how this works.

  1. The router you use is an AirPort Base Station
  1. Access AirPort Utility. Locate this in the Utilities folder, under the Applications folder.
  2. Choose your base station in the give list. Enter the password when asked.
  3. Choose Base Station > Add WP Printer from the menu bar.
  4. Choose either one of “PIN” or “First Attempt” for the WPS connection type. Click Continue.

If you choose “PIN”, enter the printer’s PIN. Find this PIN on the printer’s manual. Click “Continue”. See if the printer’s MAC address listed in AirPort Utility. Click “Done”.

If you choose “First Attempt”, press the printer’s WPS button. See if the printer’s MAC address listed in AirPort Utility. Click “Done”.

  1. Quit the program.
  1. The printer can be connected to a Mac through USB
  1. Connect the printer to a Mac using a USB cable.
  2. Install software for Mac. The software comes with the printer. See if the software includes a setup assistant.
  3. Use the assistant to link your printer with the Wi-Fi network.
  4. Unplug the USB cable from both Mac and the printer. The printer should still be linked to the network after unplugging.
  1. The printer can create ad-hoc Wi-Fi network
  1. Install printer software for Mac that comes with the printer. See if the software includes a setup assistant for the printer.
  2. Make sure that the ad-hoc Wi-Fi network on the printer is turned on. Refer to the printer’s manual guide on how to do this.
  3. Access your Mac’s Wi-Fi menu. Click the icon of Wi-Fi in the menu bar. Choose the printer’s ad-hoc Wi-Fi network’s name. Keep in mind that while your device is on the network that the printer uses, your device cannot connect to the Internet or anything else on the regular Wi-Fi network.
  4. Use the setup assistant of the printer’s to link your printer to the Wi-Fi network. Refer to the printer’s manual guide to find out how to do this. Your printer may restart first before connecting to the network.
  5. Go back to your Mac’s Wi-Fi menu. Switch to your regular Wi-Fi network.
Scanner Software and Driver Download

Canon PIXMA MX492 Scanner Software and Driver Download

Operating SystemVersionSizeDownload
PIXMA MX492 series Full Driver & Software Package (OS X 10.11/10.10/10.9/10.8/Mac OS X 10.7)01.0316 MBDownload
PIXMA MX492 series Full Driver & Software Package (Windows/Vista/XP)01.0150 MBDownload
PIXMA MX492 series MP Drivers (Windows/Vista)01.0232 MBDownload
PIXMA MX492 series CUPS Printer Driver (OS X 10.11/10.10/10.9/10.8/Mac OS X 10.7)12.1.0.016 MBDownload
PIXMA MX492 series XPS Printer Driver (Windows/Vista)0,26736111118 MBDownload
Canon MX492 ICA Driver (OS X 10.11/10.10/10.9/10.8/Mac OS X 10.7)04.01.031.7 MBDownload
Canon MX492 IJ Printer Driver for Linux (debian Packagearchive)05.10515 KBDownload
Canon MX492 IJ Printer Driver for Linux (rpm Packagearchive)05.10269 KBDownload
Canon MX492 IJ Printer Driver for Linux (Source file)05.10395 KBDownload
Canon MX492 ScanGear MP for Linux (debian Packagearchive)03.10236 KBDownload
Canon MX492 ScanGear MP for Linux (rpm Packagearchive)03.10213 KBDownload
Canon MX492ScanGear MP for Linux (Source file)03.10204 KBDownload
MX492 series (PDF) User Manual (Windows)01.0015 MBDownload
MX492 series (PDF) User Manual (Mac)01.0011 MBDownload
MX492 series Getting Started Guide (software installation part)V13.4 MBDownload
MX492 series Getting Started Guide (device setup part)V11.6 MBDownload
MX492 series Getting Started Guide (device setup part)V11.6 MBDownload
Guide for Quick Menu (Mac)V2.61.1 MBDownload
Guide for Quick Menu (Windows)V2.61.1 MBDownload
Canon MX492 Guide for My Image Garden (Windows)V3.211 MBDownload
Guide for My Image Garden (Mac)V3.211 MBDownload
ScanGear MP for Linux (Operation guide)03.1085 KBDownload
Canon MX492 IJ Printer Driver for Linux (Operation guide)05.1072 KBDownload

CanonIJmanual.com – provide a download link for Canon PIXMA MX882 publish directly from Canon website with easy-to-download, to get the download link can be found below.